Saturday, November 20, 2021

Storage Shed Preparation & Delivery

The past three weeks, I've spent a little time out at the land working to prepare for a storage shed I ordered a few weeks ago.  I've accumulated a fair amount of tools and supplies which are taking up valuable space in the cabin.  Additionally, the ATV is always a mess from being in the existing shed with is falling apart.  I decided to buy the storage shed so that I can create a place for everything and the tools and ATV would be stored well and ready for use when I need them.

The first project was to remove a cedar tree that was in the way of the storage shed.  I wanted the storage shed in this particular location so that it was close to the cabin.  I can pull right up in front of it when I enter the property but it is just out of the way.  Additionally, it blocks the view of the neighbors who can see across my land as they drive through this area.  It is a tight fit but I have room for a 12' x '18 shed.

Once the tree was removed, I had to level the land and luckily was able to use my father's skid steer.  I leveled out some high spots on the land and used the dirt to bring the future location of the storage building up to level.  I added quite a few piles of dirt and leveled multiple times to get it really flat.  I then drove the skid steer over it many times to pack it all down really well.  The next step will be adding the pavers which the shed will be placed on.




The pavers were more of a challenge than I expected as it is a bit of a pain to level 16 pavers relative to one another.  I leveled them all according to the cabin dimensions provided by the builder.  Unfortunately, when I was sent a picture of the shed before delivery I noticed that the dimensions could not be right.  I drove over myself to measure the finished shed and found I needed to move half of the pavers which took another afternoon.

The actual delivery of the shed took less than an hour.  My preparation work was good and when the shed was placed on my pavers it was perfectly level.  The equipment used in the deliver was quite impressive.  Once setup, I spent the rest of the afternoon moving tools over into the shed from the cabin and the older shed that we have used to this point.






Seeding with Native Grass

The perimeter of the property was cleared by a bulldozer prior to my purchasing of the land to make way for a fence.  The cleared areas are overtaken by weeds of various types which I'd like to convert over to native grass.  The trouble is determining which form of native grass to use in our area of Central Texas.  I'll use this article to track what I learn about the various options.

When planning to sod an area, or create a food plot for that matter, it is helpful to know the size of the area you plan to seed.  You can attempt to measure but that can be rather challenging with larger spaces or uniquely shaped areas.  A good option is the following website which allows you to set the perimeter of the space you want measured and it will tell you the area of the space selected...

Native Texas Grasses:
Buffalo Grass
This is a native grass to a large portion of the US.  It grows 5 to 8 inches tall and requires only 12" of rain a year.  It looks quite similar to some of what we have on the property already.  
This is a blue-ish clumping style grass that is somewhat similar to some spots on our land today.  It grows to between 1' and 4' high and requires only 20" to 40" of rain a year.  I suppose it could be used to add some variety to an area but is a bit taller than I think that I'd really want if being picky.

Blue Grama

This is another turf type grass which does not grow over 6" tall and requires only about 7" of rain per year.  Unlike some of the other grasses it can grow in a partial sun area rather than just full sun.  A mix including this would be a good option.