Storage Shed Preparation & Delivery

The past three weeks, I've spent a little time out at the land working to prepare for a storage shed I ordered a few weeks ago.  I've accumulated a fair amount of tools and supplies which are taking up valuable space in the cabin.  Additionally, the ATV is always a mess from being in the existing shed with is falling apart.  I decided to buy the storage shed so that I can create a place for everything and the tools and ATV would be stored well and ready for use when I need them.

The first project was to remove a cedar tree that was in the way of the storage shed.  I wanted the storage shed in this particular location so that it was close to the cabin.  I can pull right up in front of it when I enter the property but it is just out of the way.  Additionally, it blocks the view of the neighbors who can see across my land as they drive through this area.  It is a tight fit but I have room for a 12' x '18 shed.

Once the tree was removed, I had to level the land and luckily was able to use my father's skid steer.  I leveled out some high spots on the land and used the dirt to bring the future location of the storage building up to level.  I added quite a few piles of dirt and leveled multiple times to get it really flat.  I then drove the skid steer over it many times to pack it all down really well.  The next step will be adding the pavers which the shed will be placed on.

The pavers were more of a challenge than I expected as it is a bit of a pain to level 16 pavers relative to one another.  I leveled them all according to the cabin dimensions provided by the builder.  Unfortunately, when I was sent a picture of the shed before delivery I noticed that the dimensions could not be right.  I drove over myself to measure the finished shed and found I needed to move half of the pavers which took another afternoon.

The actual delivery of the shed took less than an hour.  My preparation work was good and when the shed was placed on my pavers it was perfectly level.  The equipment used in the deliver was quite impressive.  Once setup, I spent the rest of the afternoon moving tools over into the shed from the cabin and the older shed that we have used to this point.