Sunday, November 8, 2026

Fence Post Removal & Shed Clean Up

Today was a nice fall day at the land with the temperature barely in the 60s and a light rain most of the day.  Despite the rain, I made the trip to take advantage of some time to do a bit more clean-up work.  This time, I focused on collecting the old garden fence posts that I removed several years back and stacked by the old shed.  The plan to is to just take the to the dump ground rather than have them continue to clutter up the place.

Since I was by the old shed, I looked inside to see what was still stored in there.  



I ended up collecting a few things from the old shed to take to the dump ground.  I'm not using any of the items and they are just taking up space.  I collected the old water hose, saw horse, two tires, and spare pieces of wood.



I planned to sell an old cattle trough for a few dollars in a local auction but I found one leg was rotten and the plastic inside was broken.  Once I noticed that, I just cut it up and put it in the back of the truck too.  


I don't have much free time lately but am trying to use what I have to do a little maintenance work.  With that in mind, I figured I'd also take a picture of what is in the cabin as I'll need to go through some of it too.


With work done, I drove around on the ATV some.  I found the neighbors large game fence now has the gate on my side closed.  I can only other see one other side of the fence (south side) and that gate remains open.  His posts that support the gate were not installed very straight so the gate does not close properly and you can tell at least hogs and perhaps some deer are getting in and out under the gate.

Friday, October 30, 2026

Picnic Table Removal & Large Game Fence

I spent some time at the land today and did a few small maintenance items.  

The wooden picnic table was given to me around 10 years ago by my parents.  It was a little old at the time and has become more deteriorated as the years have passed.  I cut it apart today using a Sawzall and loaded it into the truck for a trip to the dump ground.  While I was at it, I loaded up an old galvanized trash can we used as a compost bin years ago which then became an outdoor trash can at the land.



I put a 2027 registration sticker on the trailer while I was out there.  It hasn't been on the road in a while but I register it anyway.  It is presently covered in limbs that we need to burn at some point.  I've found it so much easier to burn when you have something like a mini excavator to control the fire and continue to feed it various items you need to burn.  It keeps the fire smaller and contained versus piling it all up and starting a huge fire.  

I unfortunately found that the ATV would not start as the battery is dead.  I keep it on a Battery Tender so I suspect there is something wrong with the battery.  I was able to pull start the ATV to use it a little.  Before leaving, I pulled the battery and found it is almost six years old (11/2020 purchase date) so it is about the time that it would just stop working in general.  I brought it home and plan to get a new one.

There is a cluster of red oak trees between the cabin and shed which were getting really overgrown.  I cut them back last time but left all the limbs on the ground.  I took the time today to cut those limbs up and put them either on the trailer or on the burn pile.  It looks much better now that it is all trimmed up.


I collected some old cut up pieces of cedar that I thought I'd burn but never did.  Since I was going to the dump and it is so deteriorated, I just decided to throw them in the dump.  It is small but helps to clean up the place a little.



I didn't relax too much today but did enjoy being outside with the sky overcast and the temperature at 72 degrees.  It is nice that it is starting to cool down again.

When I drove the property line, I did find one big surprise.  The neighbor to the east of me installed a huge game fence blocking all animals from entering my property from that direction.  It is really unfortunate and likely why I'm not seeing much on my feeder.  Between that and the other neighbor that has everyone in his family hunt the five stands they have it isn't going to be a productive hunting season.  




Sunday, September 6, 2026

Oak Tree Maintenance & Removing Cabin Fencing

Many years ago, I made a fence out of T-posts and cattle panels.  At the time, we had cattle on the property and needed a way to preserve a space for our use which wouldn't have everything pushed over or trampled.  The cattle have been off for years and it is time for the fence to be removed.  I'm going to use the cattle panels for another purpose and the fence is starting to make it easier for the area to get overgrown.



It didn't take a significant amount of time to pull the fence down but it was another 100+ degree day.  The hardest part was pulling the t-posts as we have not had much rain but I managed to pull them all.  With the recent loss of the deer lease I've been on for years, I have quite a collection of unused t-posts.


I brought my Milwaukee pole mounted chain saw and was able to use it to trim up this cluster of oak trees.  The tree was getting out of hand and it was hard to drive around it in the truck.  This triming will help but created a large pile of limbs I'll need to deal with at some point.  I would have done something with them today but I've an abundance of down trees to deal with.  I also watered a few of the smaller oaks that I planted near the cabin in the last several years in hopes of keeping them alive.   

    
The large pine tree in front of the cabin fell in February of 2025 and I still have not fully removed it.  I've been busy with work and haven't been spending as much time keeping things maintained.  While I'll struggle for time as much now, I really want to find time to work through these things over the next several months and through the winter.  


The last things I did were just some small clean-up inside the storage building and cabin.  I've accumulated things in them that we simply don't need or will never use out there.  Since we don't have much need for them, I'm either going to trash them, clean them up to donate, or try to put them in a local auction.  

Thursday, July 2, 2026

Land Clean Up - Shredding Around Cabin and East Fenceline

I've decided to invest some time cleaning up the property as it has gone neglected for a while.  I'm not sure how quickly I can work through this project but I'm sure I will get it done over time.  Today, I decided to spend some time driving around and taking an inventory of the items that really need work.  I then used the DR shredder around the cabin and all down the east side of the property.  The east side was such a mess, I was exhausted and have no pictures of it to share.



I keep shredding around this down pine so it is accessible.  I've covered the trailer in limbs that I've cut from it.  At this point, I really just need to find some time to setup a burn pile and be prepared to burn it when weather conditions allow.  



Sunday, May 3, 2026

New Protein Feeder Setup

The deer lease I've been a part of for years in Star, Texas is no longer available.  A few weeks ago, I removed all my feeders from that deer lease.  I've added the protein feeder to this property as it holds an incredible amount of protein (9 or so 50 lb. bags).  


The area is so overgrown, it caused the game camera to go off constantly.  I returned two weekends later and trimmed it all back with a weedeater.  It now looks considerably better.


I'm hoping to invest heavily in this season at the land in hopes of shooting a deer out there.  Strangely, I've always had the deer lease so I've never shot a deer out at the land.


Saturday, November 1, 2025

Hunting at the Land - Nov 2025

For the first time in many years, I hunted at the land this evening and again the following  morning.  It was a quick trip as I wanted to hunt out there and didn't want to bother with the long drive out to the deer lease.

I only saw one doe at a distance walking through some thicker shrubs but I really enjoyed the time.  It is a unique experience to look across land you own, have worked on, and am only now taking the time to enjoy.  I snapped a few pictures of the view out the right towards the feeder and out towards the left toward the tank.



I built this stand during the Covid summer months and added it to the property that fall.  I know I'll be losing the deer lease next year so I couldn't help but think of what I might do next year to make this property a little better for hunting as my options will become far more limited.  While I don't expect to shoot near the same caliber deer, the concept of investing some more time out here making it better is exciting.



Thursday, August 28, 2025

Shredding and a Broken Shredder

 We have not spent much time out at the land lately and it was very overgrown.  I decided to spend a bit of the day shredding and then enjoying a nice steak cooked over a fire.  

I focused mostly on shredding around the cabin and inside the fence near the entry road.  As I was finishing up a strip by the down pine tree, the entire wheel broke off the shredder.  The pin sheared completely off.  I could tell it was leaning a little and the tire was dragging on the support brace and thought it might hold but it did not.  

I put it up on some blocks and took it apart.  I'll need to find the time to weld it up.  I had really hoped I'd make a few trips out to shred everything this fall.  This will set that plan back just a little.  At least what I got done looks nice.  








Sunday, December 24, 2023

Refinishing Mom's Old Bench

I've searched but can't find a before picture of my mom's bench.  She gave it to me in 2016 after we purchased our land.  We sat it out in the elements alongside a picnic table and it held up reasonably well until around 2022.  At that point, the wood was rather rotten and it would likely collapse if you sat on it.

There are actually two of this exact bench and growing up they were on either side of our front door on the porch.  Once that house sold, they went to some property that my parents owned and one remains there today.  I believe these were purchased in either 1986 or 1987.

My mom passed away a few months after giving me the bench in November 2016.  I'm not sure what I'm going to do with the bench after restoring it but feel that it should be restored and used.  With that in mind, I brought it home from the land in 2022 and slowly, very slowly, worked to restore it.
 
The first and easiest step was to remove all the rotten boards and striped down the cast iron side pieces.  I used a wire wheel to clean the side pieces, cleaned then with mineral spirits, used some Rustoleum primer, and lastly some Rustoleum satin black paint.  They don't have any damage to them that I can tell and look almost new when painted.


After painting these in October 2022, I measured the boards and then the project froze as I debated what wood would look the nicest, last the longest, and not be overly expensive.  With too many options, I didn't do anything else with it until November of this year (2023).

While on vacation for Thanksgiving, I decided to just use really nice red oak boards from Lowes.  They are not pressure treated and are the most expensive of the options.  However, they with out a doubt will look the best when stained.  Additionally, I now plan to place it on a porch rather than out in the elements.

I purchased the red oak boards and cut them to match the original side boards.  The originals were all 4' long and there were 12 in total (9 x 2.5" wide, 2 x 1.5" wide, and 1 x 1" wide).  After cutting them all, I used a router to round over the edge of each which is how the original boards were cut.  Strangely, when looking at the original boards, some appear to have tonge and groove edges which is unique.

With the wood cut, I tested out stain that I have along with some that my father-in-law donated to the cause.  In the end, I purchased some Cabot Cordovan Leather Semi Transparent stain and sealer.  I stained all the boards one side at a time with two coats which took about a week.  After putting on two coats, I realized the can states to not use more than one but so far everything seems fine and dried fully.


I used a 1/4" brad point drill bit with a template a I made from a piece of 1.5" x 1.5" angle iron to drill perfect holes in each end of the boards so they could be bolted to the end pieces.  Everything is bolted together using a mix of 1.5" and 1.75" long 1/4"-20 stainless steel bolts with a large Truss head and Nylon insert nuts so they will not come loose.

I had an extra 1.5" wide board that I finished along with the rest of them in case something didn't work out (2.5" board ripped to 1.5" and 1").  In the end. I chose to use it as the top board along the back rather than the 1" board.  It looks a little better and will no doubt be more sturdy over the years.  I'll just set the 1" board to the size and use it to remember the color of the stain or on another project.    

While I don't have a picture of the bench before starting work, the following is a picture of a few of the boards I saved set beside the finished boards for comparison purposes.


There was a metal strap which ran up behind all the slates and screwed into them.  It was rather thin, had some rust damage, and the screw holes were not aligned well with the wood so I made a new piece from 3/4" wide 1/8" metal.  It took some time to bend it to match the contour of the wood.  I then painted it with the Rustoleum satin black and fastened it to the planks.  I finished the bench on Christmas Eve about a month after I started working on the wood.

Sunday, December 3, 2023

2023 Hunting Season - 10 Point Buck

This season, I was finally able to shoot my first 10 point buck.  They are not as common in the area where I hunt and I have shot everything else including a 9, 11, and 12 point.

The buck came out on the afternoon of Saturday, November 10h.  It was only 3:25 in the afternoon so I was not expecting much to be out that early.  I saw him right as he came out of some brush on the neighbors property.  I was able to catch a quick glimpse of him through my binoculars before he went behind some brush.

My binoculars are only 10x while my rifle scope is 12x.  When something looks promising, I'll switch from my binoculars to my rifle.  I did that in this instance and by the time I had it up, the buck was nearing the edge of my feed pin.  He was on a straight line to the feeder, wasting absolutely no time.  The path he took is represented by the red line in the picture below with the red circle showing where I first saw him exit the brush. 



I watched him in the feed pin for what seemed to be a long time but was likely only a few seconds.  I wanted to get a good shot and also ensure the bullet would clear the bars of the hog panel surrounding the feeder.  When all was in alignment, I pulled the trigger slowly and saw no movement afterwards.  I checked my watch as I normally wait about 30 minutes before walking over and it was 3:27. 

I exited the stand after about 10 minutes and walked straight to the truck.  I then drove the truck over to the feed pin.  This was more to save overall time than anything as the feed pin is only 125 yards from the stand.  I found the buck fell in his tracks without moving a step.  He was immediately under the feeder.





The buck is 16" wide between the main beams and very symmetrical.  He isn't the largest that I've shot and based on my scoring is a 132.125 gross and 128.785 final buck by Boone and Crockett standards.  I had his antlers European mounted and they look great.  They will likely end up on the wall in my office at work.

Sunday, November 19, 2023

Pumpkin PIe from Scratch

Today, I decided to make a pumpkin pie from a pumpkin at the store.  It turned out quite good so I'm posting this as much to save the recipe as anything else.

For a pumpkin pie, you need two small pie pumpkin.  There are a few different varieties that you can use.  However, our grocery store had a generic pie pumpkin label on them.  I picked two that were somewhat small but heavy as that was the recommendation I found online.  


With the pumpkins purchased, I washed them well, removed the stems, cut them into quarters, and removed all the seeds.  I then cut them up more into 5" chunks and placed them on a foil covered baking plan.  I then cooked the pieces for an hour at 375 degrees with the skin up.  


After the pumpkin was cooked, I used a spoon to scrape the pulp off the rind.  I put it in a blender and pureed it until it was smooth.  From this point, you make the pie using a standard recipe with the blended pumpkin replacing what you would buy in a can.


I made my pumpkin pie using the Libby recipe which calls for the following ingredients:
3/4 cup of sugar
1 teaspoon of cinnamon
1/2 teaspoon of salt
1/2 teaspoon of ground ginger
1/4 teaspoon of ground cloves
2 large eggs
15 oz pumpkin pulp
12oz evaporated milk

I used a bit more of the sugar and spices as my recipe stated it is needed when not using pumpkin from a can.  These are then all mixed together, poured into a 9" pie crust, cooked at 425 for 15 minutes and then 350 degrees for another 40 minutes.  I actually had to cook mine an extra 10 minutes as it was really runny at the start.  I'm tempted to try it next time with condensed milk which is a little thicker.  

Sunday, July 30, 2023

Neighboring Property Development and Fence Work

Land prices have been on the rise since COVID began.  The increase in land pricing has caused more properties to go up for sale.  Additionally, those who don't sell have more reason to improve and invest money in the property they own.  I've seen a bit of this in the area of my land.  I'll include a few examples...

On the east side of the property about 100 yards from the SE corner, a neighboring property line runs into mine.  There was a railroad tie here that blocked my ability to extend the fence down to the corner properly.  I removed it and then put it back into place still on the property line but slightly over so I could finish my fence. 

I put the railroad tie back in place on December 17th and thought nothing more of it as that whole side of the neighboring properties is so grown up that no one ever goes back there.  Strangely, on April 22nd, I went back out to find that someone had cleared that property line, ran a new fence, and connected it to the railroad tie I put back into place.  I don't know when it actually occurred but rather strange timing on my part.

Before:

After:

In this same area, the SE corner of my property was super overgrown and I couldn't see the corner of the property which on the survey was marked as an oak tree.  When I had the mini excavator, I cleared back to the tree and along the fence line expecting to get from the railroad tie down to this corner ready for fencing.  This is another area so dense that this property owner never went back there either.  

This weekend, I drove the property line for the first time since late April.  I found the neighbor to the south cleared his east fence line up to the tree which marks the corner of my property.  He then installed a new fence along side that part of the property and connected it to the metal piping that I exposed when clearing back in November.  Also really strange timing despite being six months apart.


In the spring of this year, I began working a little on the north property line as the neighbor's fence crossed onto my property.  This particular neighbor, wrapped his fence through trees many years ago and had it run on to my property and the neighbor on the opposite side.  I started clearing it and then a large storm came through breaking the top out of several of the trees.  I ended up pulling the fence out of those trees, cutting them down, and then moving the fence closer to the right spot.

I noticed some unique cars going to that neighbors house while doing some of this work.  I learned this past weekend that he ultimately moved out and is suffering from dementia.  Seems his children are cleaning up the property now with plans of selling it in the near future.  I guess I need to hurry and get the rest done while I can before I have to convince someone else of where the property line I had surveyed is actually at.

Before:

After (opposite angle):

Lastly, I mentioned my neighbor ran his fence around trees rather than using posts causing it to come over onto my property.  He did the same with another neighbor I spoke with this weekend.  He is the one who told me about the case of Dementia.  We ended up talking as he is now cleaning his property line shared with the neighbor who came down with Dementia before the property is sold and there are conflicts over the property line.  You can see the clearing and the flags for the property line in the picture below.


I don't have pictures of it but this last fall, I noticed property markers show up on the east fence.  I looked into it and found the old man on that side started selling parts of his property to another neighbor.  He sold two different 20 acre segments of land that neighbor mine.  I've not seen anything of it yet except some mowing along that fence line which is a good change but I'm sure more of it will come in the future.  

We have owned the property for seven years now and nothing really changes.  The neighbors are all quiet and we are at the end of a private easement.  It is strange to have all of these changes happening around you on property that has largely been ignored.  I don't see it as negative but more just something to watch as you never know what happens next.

Saturday, July 29, 2023

Texas Metal Tanks Wildlife Waterer (Part 2)

This Saturday, I returned to work on the wildlife waterer a bit more.  I built a small fence around the perimeter using a spare hog panel and a small scrap piece of a cattle panel I cut a few years ago.  The two combined were just enough to circle the water tank so that hogs would not push it over and the cut piece formed a gate.  I cut a few 5' T-posts down slightly so that they are just a couple of inches below the ring of the funnel.

I mounted the funnel to the barrel itself using the 2" self-taping screws that they provided.  I'd considered coming up with brackets or something a little better but in the end just used the screws.  


The funnel is 6' in diameter.  If we get 1" of rain, it should amount to 17 gallons.  If I wanted the entire tank filled it would take 5" of rain to make it happen.


I ran a regular water hose from the bib at the bottom of the tank over to the watering pan.  I coiled the extra hose around the tank as opposed to cutting it.  


The tank is out of the way so that if I were to shoot anything in the pen, I'm not going to hit the tank with a bullet.  It is visible in the back left of the picture above.


I poured 15 gallons of water into the tank to get it to at least fill the water pan.  After waiting a while, it never filled the pan.  The bib is on at the tank so I'm not sure what is wrong.  The process to find out isn't hard but I called it a day as I'd been working for several hours, it was 2 o'clock, and the temperature was 101.  I'll work on it a bit more on the next trip.